Autel MaxiSys Mini Specifications download pdf (Page 53)

Diagnostics Operations Diagnosis

 To perform setting for live data record

1. Tap the Setting functional button at the bottom of the Live Data

screen.

2. Tap the Record navigation button.

3. Tap the

○

> button on the right of Trigger Type bar and select

the required trigger mode.

4. Tap the

○

> button on the right of Duration bar and select a

length of time.

5. Tap the

○

> button on the right of Trigger Point bar and select

a relative percentage of a record length to be reserved before

the data recording start point.

6. Tap Done to save the setting and return to the Live Data

screen; or tap Cancel to cancel without saving and exit Setting.

 Done Button - confirms and saves the setting, and returns you to

the Live Data screen.

 Cancel Button – cancel the setting operation, and returns you to

the Live Data screen.

4.6.5 Active Test

The Active Test function is used to access vehicle-specific subsystem and

component tests. Available test vary by manufacturer, year, and model, and

only the available tests display in the menu.

During an active test, the tester outputs commands to the ECU in order to

drive the actuators. This test determines the integrity of the system or parts by

reading the engine ECU data, or by monitoring the operation of the actuators,

such as switching a solenoid, relay, or switch, between two operating states.

Selecting Active Test opens a menu of test options that varies by make and

model. Selecting a menu option activates the test. Follow all screen

instructions while performing tests. How and what information is presented on

the screen varies according to the type of test being performed. Some toggle

and variable control tests display Active Test Controls at the top of the screen

with data stream information below, or vice versa.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 115 116

No comments

Autel MaxiSys Mini Specifications Page 53